Roc-Master Piping Solutions Ltd. Shanghai
Main products:Flanges,RocCLAD Pipes,RocCLAD Fittings,RocCLAD Flanges
Products
Contact Us
  • Contact Person : Mr. Zhang Forrest
  • Company Name : Roc-Master Piping Solutions Ltd. Shanghai
  • Tel : 86-21-34304280,34304296
  • Fax : 86-21-34304003
  • Address : Shanghai,Shanghai,Block A No. 1835 Duhui Road,Minhang District, Shanghai 201108, China.
  • Country/Region : China
  • Zip : 201108

WYE Tee WEY Tee

WYE Tee WEY Tee
Product Detailed
Related Categories:Pipe Fittings
Related Product Searches:WYE Tee WEY Tee,High Quality,WYE Tee, WEY Tee,WYE Tee
Forged WYE Tee

Roc-Masters Piggable Wye fitting is a forged Y fitting that joins pipelines and permits pigging from either inlet branch toward the single outlet. The Wye Fitting allows pigs to pass from a full-size or reducing lateral line into a trunk line. It provides two inlets separated by an angle of approximately 30°. The angle may be more or less for intelligent pigs, depending on pipe diameter and pig manufacturer, and the configuration can be either symmetrical or asymmetrical. The Wye Fitting will pass commonly used pigs, including foam-type swab pigs, articulated scraper pigs, spheres, batching pigs, gauging pigs, and intelligent pigs. In general, pigs longer than 1.5 to 2.0 times the nominal pipe diameter should be articulated, and gauging pigs should be assembled with gauging plates mounted on the rear end of the pig rather than on the front end. The Wye Fitting is available with either a weld-end configuration or with flanges and pipe pups. The Wye Fitting can be designed to suit all ANSI or API pressure ratings for most pipe sizes.

Design Parameters:

-  Nominal Pipe Size (NPS): any API Specification 5L pipe, wall thickness and grade

-  Service: Standard (i.e. crude oil, natural gas, hydrocarbons, water or chemical injection, etc.) and Sour (i.e. hydrogen sulfide, carbon dioxide, etc.)

-  Design Pressure Rating: up to ASME Class 2500

-  ANSYS FEA to verify the design integrity before manufacture

-  Hydrostatic Test Pressure (min): 1.5 times Design Pressure Rating rounded up to nearest 25 psig

-  Hydrostatic Test Duration (min): 1 hr

-  Design Temperature Range: -20°F (-29°C) to 250°F (121°C)

-  Configuration: Symmetric or Asymmetric

-  Inlet/Outlet Ends: Butt-Weld Hubs, Butt-Weld Pipe Pups or Flanged

Material Specifications:

-  Body: ASTM A105 or ASTM A694 series, Duplex F51, Super Duplex F53. forging (size and pipeline grade dependent) NACE MR0175/ISO 15156, NACE MR 0103 compliance

-  External Coating: Carboline 890 Epoxy Paint System, Safety Yellow Color

Ordering Information

Please provide the following information on any purchase order or request for quotation:

-  Nominal pipe sizes

-  Pipe wall thicknesses or bores

-  Pipe grades

-  Design rating

-  Symmetrical or asymmetrical configuration

-  Butt-weld ends, butt-weld extension nipples, or flanged inlets and outlet

-  Specification for weld-neck flanges, if applicable

-  Gasket type, if applicable

-  Pig types anticipated, if known

WYE Tee WEY Tee



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.